[NEW] POWER LED HEAD BULB COMPACT STAR HF
Achieves the best wide and easy-to-see cut line light distribution!
compact star HF
Easily upgrade to LED with the same shape as a halogen bulb!
Pursuing maximum cooling efficiency with an ultra-quiet fan!
The highest brightness maintenance rate for a small bulb!
- Compatible with vehicle inspection
- Combined use as head and fog
- 2 year warranty
- Color temperature 6000K
- Color temperature 3800K
- Halogen same shape
- Built-in driver
- Built-in (rear) fan
+heat pipe - rear fan
*H1/H3 type - High luminous flux maintenance rate
- brightness single
4400 lumens - Brightness H4
Hi4000/Lo3600
lumen
Compatible with new vehicle inspection standards (low beam vehicle inspection)
A newly designed product with improved applicability for low beam vehicle inspections.
Optimize the cut-off line angle upward to the left and the distance to the optical axis measurement point. Due to the optimization of light collection efficiency, some vehicles have an increase of approximately 4.5 times or more compared to genuine halogen.
It is also very effective for vehicles where cut lines are difficult to read or the brightness does not increase!
*The above images are compared when the halogen bulb is installed, the optical axis is aligned, and the bulb is replaced with an LED bulb. (Compared without adjusting the optical axis when replacing LEDs)
Normally, when replacing a bulb, there will be some misalignment, so optical axis adjustment is required each time.
Easy-to-read 6000K (white light) and 3800K (bulb color) settings!
Irradiates areas that cannot be illuminated with halogen to make it easier for drivers to see, greatly improving visibility! Approximately 1.7 times brighter (H4 low beam)
Single bulb 4400 lumens *Value for 2 bulbs for 1 car.
H4 (Hi/Lo) 4000/3600 lumens *Value for 2 bulbs for 1 unit.
Available in two colors: 6000K (white light), which is bright and easy to see, and 3800K (light bulb color), which is gentle on the eyes and soft. *3800K is available only for H4/H8, 9, 11, 16/H3.
Ultra-compact design with the same shape as halogen/Full lineup
Developed with the aim of being the same size as a halogen bulb. Integrated structure with built-in driver unit.
A full lineup of versatile valves that can be used as head valves and fog valves.
Set H4/H8・9・11・16/HB3・4/HIR2/H7/H1/H3. H4 is compatible with 12V and 24V. Others are 12V specifications.
For application, please refer to the application table by vehicle type.
Maintain brightness with high heat dissipation mechanism
Strongest cooling mechanism: heat pipe + built-in silent fan
Equipped with a heat pipe with excellent heat transfer. The heat from the light emitting part is efficiently transferred to the built-in fan part to achieve the ideal luminous flux maintenance rate without heat sag.
●Emphasis on heat dissipation, which is the weak point of small valves.
●The heat from the light emitting part is immediately transferred to the rear fan part.
●The rear fan layout boasts maximum cooling efficiency to suppress optical phenomena caused by heat sag.
*All models with built-in fan and heat pipe are H4/H8/9/11/16/HB3/4/HIR2/H7. H1 and H3 only have built-in fans.
Brightness (luminous flux) maintenance rate of 95% or more
Suppresses the drop in brightness due to heat sag during the initial lighting and stable period.
The brightness of the initial lighting (100%) is kept at 95% or more even when stable.
A high brightness (luminous flux) maintenance rate is an important element that minimizes the burden on electronic components and is directly linked to long life and high durability, and Compact Star HF was designed with long-term brightness in mind. We are selecting parts.
High beam indicator canceller for H4 (sold separately)
Some Toyota/Daihatsu vehicles require an option sold separately in order to turn on the indicator lamp. For details, please refer to the vehicle model application table.
*For 12V: RGH-P951.
*For 24V: RGH-P952.
*Use 1 piece per car and attach it to either the left or right side.
Easy to install! You can work as if you were replacing a halogen bulb!
H4 and other single types are about the same size as halogen bulbs, so you can install them with a coupler on without worrying about the rear size.
Since it is polarity free, there is no need for voltage detection.
How to replace H4
Single (H11) replacement method example
Product lineup
RGH-P934 H4 6000K
RGH-P931 H8/9/11/16 6000K
RGH-P944 H4 3800K
RGH-P941 H8/9/11/16 3800K
[Product number/specifications]
*The product contains 2 valves. *Brightness is the value for a total of 2 lights on the left and right sides.
*Power consumption is based on 1 light on each side. *This is a model for 12V vehicles only. H4 is a 12/24V compatible model. Commercial vehicles are covered by a one-year warranty.
*Case size: H110.5 x W105.5 x D60mm
| Product number | Shape | Color | Brightness | Rating | List price (tax included) | JAN code 49963271 |
|---|---|---|---|---|---|---|
| RGH-P931 | H8/9/11/16 | 6000K white light | 4400lm | 12V 24W | 9,680 yen | 08801 |
| RGH-P932 | HB3/4 | 08818 | ||||
| RGH-P933 | HIR2 | 08825 | ||||
| RGH-P934 | H4 | Hi4000/ Lo3400lm | 12/24V Hi20/ Lo20W | 08832 | ||
| RGH-P935 | H7 | 3600lm | 12V 16W | 08849 | ||
| RGH-P936 | H1 | 12V 13W | 08856 | |||
| RGH-P937 | H3 | 08863 | ||||
| RGH-P941 | H8/9/11/16 | 3800K bulb light | 4400lm | 12V 24W | 08870 | |
| RGH-P944 | H4 | Hi4000/ Lo3400lm | 12/24V Hi20/ Lo20W | 08887 | ||
| RGH-P947 | H3 | 3600lm | 12V 13W | 08894 | ||
| RGH-P951 | high beam indicator adapter | For 12V vehicles only | 4,400 yen | 09549 | ||
| RGH-P952 | For 24V vehicles only | 5,280 yen | 09556 | |||
| RGH-P953 | high beam indicator adapter * May 2024 ~ Successor to P951/P952 | Compatible with 12V/24V vehicles | 4,400 yen | 10286 | ||