POWER LED FOG TWIN COLOR
You can instantly change the color with the fog switch on the handle!
Switch between white and yellow light depending on weather and road conditions
6500K (white) for a stylish look and 2800K (yellow) for weather resistance
The ultimate fog color switching product that covers all expected operations!
- Compatible with vehicle inspection
- For fog bulbs only
- 3 year warranty
- Color temperature
6500K⇔2800K switchable - Separate driver
- Fanless
- 12V/24V compatible
- Brightness
3000 Lumens
Easy and safe switching mechanism
[Easy color change] The color will change when you turn the genuine fog lamp switch ON and OFF twice while it is on. (Limited to operation within 2 seconds)
[Built-in memory function] The color that is turned on for more than 5 seconds is remembered. The next time you turn it on, you can turn it on with your favorite color. (This will be maintained even if the battery is removed.)
[Perfect program settings] Program settings that prevent color differences between the left and right sides from occurring when using auto lights in conjunction with the camera. A reset function is also built in just in case.
*If you turn the light on and off five times, the left and right lights will return to the same color. (This must be done within 3 seconds.)
Easy color switching
Memory function
Product box size: H110.5✕W105.5✕D60
Brightness and light distribution
Achieves a total luminous flux of 3000lm (lumens), surpassing halogen bulbs. Achieves the same brightness for both white and yellow light. *Brightness is for two bulbs (one unit).
Achieves a light distribution pattern that far exceeds that of genuine halogen bulbs. The optimal layout of the LED chips is pursued to strongly illuminate the road surface from the front to the back, providing peace of mind to the driver. It firmly suppresses unnecessary light distribution (glare light) to the upper part, and irradiates strong, uniform light up, down, left and right below the horizontal line.
Wall illumination comparison
It suppresses glare (unnecessary light distribution) above the horizontal line and emits strong, uniform light distribution up, down, left and right. *Because the yellow light is slightly higher, it is necessary to adjust the light axis when the yellow light is turned on during installation.
Road surface illumination comparison
It provides stronger illumination from the front to the back and slightly further away than genuine halogen bulbs.
Achieving both practicality and dressing up - Differences in light distribution
The white light has a "wide illumination" that compensates for the difficult-to-illuminate range in front of the vehicle with genuine headlamps.
The yellow light shines slightly further back to make it easier to see and distinguish poorly visible wet roads, and assists the "driving visibility zone."
*The irradiation distance shown in the illustration is the reference irradiation distance when the fog lamp height is 350 mm. It varies depending on the lamp height and angle shape.
*When installing, please adjust the light axis based on the yellow light distribution. If the light axis is set based on the white light distribution, the light distribution will be high when switched to yellow.
LCL (distance to light center) of genuine halogen bulbs and LED fog bulbs
Designed to match the LED (center of light) height of the genuine halogen bulb. Realizes a very beautiful cut line and light distribution.
All valve rear dimensions are short type design.
The rear heat sink shape allows the product to be used in a variety of vehicles without compromising temperature control or brightness when lit.
Various features
Beam angle adjustment
The irradiation angle can be freely adjusted to match the lamp for each vehicle. The LED bulb body can be rotated to match the reflector line of the lamp. *PSX26W does not have a rotation mechanism due to the light distribution of the lamp.
Highly waterproof
Passed the JIS standard D0203 fountain test, the highest level S2 class.
Ultra-low noise design, CISPR25 compliant
Low noise design at the same level as factory-installed products. Passes CISPR25 Class 4, the Ministry of Internal Affairs and Communications noise standard.
Compatible with hybrid/EV/idling stop vehicles
Equipped with a high-performance constant current circuit. Designed to handle high voltage loads and low voltage conditions when the engine is stopped. Maintains illumination even at low voltages of up to 6.7V. Also, designed to support 24V, it can handle ultra-high voltages of up to 40V. If the shape, dimensions, and other installation conditions are met, it can also be installed on trucks.
Electrode-free design
This product has a built-in polarity-free circuit. It can be easily installed without the need to test the positive and negative terminals on the vehicle side.
Long life design
Precision design that takes into account the usage environment has achieved a long life of more than 10,000 hours.
Product lineup
Product case image
Product composition image
Component parts
・2 LED fog bulbs
・2 dedicated drivers
- 1 light distribution adjustment wrench / 2 tie wraps
*Since the valve and driver are integrated into the cable, there is no connector.
Product dimensions
[Product number/specifications]
*The product contains 2 valves. *Brightness is the value for a total of 2 lights on the left and right sides.
*Power consumption is for one light on each side. *This model is for both 12V and 24V vehicles. Not applicable to commercial vehicles. (Limited to private vehicles)
| Product number | Shape | Color | Brightness | Rating | List price (tax included) | JAN code 49963270 |
|---|---|---|---|---|---|---|
| RGH-P551 | 11/16/1998 | 6500K 2800K (Kelvin) switching | 3000lm | 12V24V 12W | 20,680 yen | 94579 |
| RGH-P552 | HB4 | 94586 | ||||
| RGH-P553 | PSX26W | 94593 |