[NEW] POWER LED HEAD BULB COMPACT STAR HF2
Combines high light output with the best cut-line light distribution!
Wider light distribution makes it easier to see from front to back
Compact Star HF2
Easily upgrade to LED with the same shape as a halogen bulb!
Pursuing maximum cooling efficiency with an ultra-quiet fan!
The highest brightness maintenance rate for a small bulb!
- Compatible with vehicle inspection
- Combined use as head and fog
- 3 year warranty
- Color temperature 6000K
- Halogen same shape
- Built-in driver
- Built-in (rear) fan
+heat pipe - rear fan
*H1/H3 type - High luminous flux maintenance rate
- brightness single
5500 lumens
*H1/H3 is 4200 lumens - Brightness H4
Hi5500/Lo4800
lumen
Compatible with new vehicle inspection standards (low beam vehicle inspection)
A newly designed product that further improves applicability for low beam vehicle inspections.
The cutoff line angle is tilted upward to the left, and the distance to the optical axis measurement point is optimized. The light collection efficiency is optimized, and for some vehicles, it is more than five times higher than the original halogen lights.
It is also very effective for vehicles where cut lines are difficult to read or the brightness does not increase!
*The above images are compared when the halogen bulb is installed, the optical axis is aligned, and the bulb is replaced with an LED bulb. (Compared without adjusting the optical axis when replacing LEDs)
Normally, when replacing a bulb, there will be some misalignment, so optical axis adjustment is required each time.
Easy to see 6000K (white light)!
To make it easier for drivers to see, it illuminates areas that halogen lights cannot illuminate, significantly improving visibility! It is approximately 2.4 times brighter (H4 low beam).
Single bulb 5500 lumens *Value for 2 bulbs per unit. *H7/H1/H3 types are 4200 lumens
H4 (Hi/Lo) 5500/4800 lumens *Value for 2 bulbs per unit.
Bright and easy to see 6000K (white light) setting.
Ultra-compact design with the same shape as halogen bulb. Full lineup
Developed with the target of being the same size as a halogen bulb. Integrated structure with built-in driver unit.
A full lineup of versatile valves that can be used as head valves and fog valves.
Available options are H4/H8, 9, 11, 16/HB3, 4/HIR1, 2/H7/H1, and H3. H4 is compatible with both 12V and 24V. The others are 12V only.
For application, please refer to the application table by vehicle type.
Maintain brightness with high heat dissipation mechanism
Powerful cooling mechanism: Copper substrate + heat pipe + built-in silent fan
Equipped with a copper substrate and heat pipes that provide excellent heat transfer, the heat from the light-emitting section is efficiently transferred to the built-in fan, achieving ideal luminous flux maintenance without overheating.
●Emphasis on heat dissipation, which is the weak point of small valves.
●The heat from the light emitting part is immediately transferred to the rear fan part.
●The rear fan layout boasts maximum cooling efficiency to suppress optical phenomena caused by overheating.
*All models have copper boards, built-in fans, and heat pipes. H4/H8/9/11/16/HB3/4/HIR1/2. H7/H1/H3 do not use heat pipes.
Brightness (luminous flux) maintenance rate: 90% or more
Suppresses the drop in brightness due to overheat during the initial lighting and stable period.
The brightness of the initial lighting (100%) is maintained at 90% or more even when stable.
A high brightness (luminous flux) maintenance rate is an important factor that minimizes the burden on electronic components and is directly linked to long life and high durability. The CompactStar HF2 has been designed and components selected with the aim of maintaining brightness for a long period of time.
High beam indicator canceller for H4 (sold separately)
Some Toyota/Daihatsu vehicles require an option sold separately in order to turn on the indicator lamp. For details, please refer to the vehicle model application table.
Compatible with 12V/24V: RGH-P953
*Use 1 piece per car and attach it to either the left or right side.
Easy to install! You can work as if you were replacing a halogen bulb!
H4 and other single types are about the same size as halogen bulbs, so you can install them with a coupler on without worrying about the rear size.
Since it is polarity free, there is no need for voltage detection.
How to replace H4
Single (H11) replacement method example
"Equipped with a valve rotation mechanism" *Available only for P982 (HB3/4HIR)
The HB3/4 type is often installed at an angle when locked in place, so it is equipped with a valve rotation mechanism. Adjustment is possible with the included L-shaped wrench.
Product lineup
RGH-P981 H8/9/11/16 6000K
RGH-P982 HB3・4/HIR1・2 6000K
RGH-P983 H4 6000K
RGH-P984 H7 6000K
RGH-P985 H1 6000K
RGH-P986 H3 6000K
[Product number/specifications]
*The product contains 2 bulbs. *Brightness is the value for a total of 2 lights on the left and right sides.
*Power consumption is based on 1 light on each side. *This is a model for 12V vehicles only. H4 is a 12/24V compatible model. Commercial vehicles are covered by a one-year warranty.
*Case size: H110.5 x W105.5 x D60mm
| Product number | Shape | Color | Brightness: | Rating | List price (tax included) | JAN code 49963271 |
|---|---|---|---|---|---|---|
| RGH-P981 *2025 On sale from December | H8/9/11/16 | 6000K white light | 5500lm | 12V 28W | 10,780 yen | 16554 |
| RGH-P982 *2026 Released in March | HB3/4 HIR1/2 | 16561 | ||||
| RGH-P983 *2026 Released in April | H4 | Hi5500/ Lo4800lm | 12V/24V Hi28/ Lo28W | 16578 | ||
| RGH-P984 *2026 Released in March | H7 | 4200lm | 12V 18W | 16585 | ||
| RGH-P985 *2026 Released in March | H1 | 16592 | ||||
| RGH-P986 *2026 Released in April | H3 | 16608 | ||||
| RGH-P953 | high beam indicator adapter | Compatible with 12V/24V vehicles | 4,400 yen | 10286 | ||